Wiring Terminal: electrical engineering series composite wiring of fixtures. Each terminal on the amount of points are different, depending on the needs and determine the technical parameters of construction model.

Power electronics in distribution line, outside the device and screen where the screen when the device is connected, goes through a number of specialized terminals, these terminals are combined, it is called Terminal. Terminal equipment within the role that will screen the peace lines connected external devices, signal (voltage and current) Transport role. The Terminal, making wiring in appearance, easy to maintain, in the distance between the line joins the main is solid, construction and easy maintenance.

Wiring Terminal, commonly used English letters and numbers, or of their hanyupinyin plus numbers, to indicate a Terminal row of maximum points at current liquidity, as well as the wiring Terminal sizes and the number of endpoints, also used to indicate that manufacturers products model.

Terminal Unit is "position", a connection is 1 "bits". Usually known as the table is the number of terminals, application of these serial numbers in different places have different definitions.

"Section" and "position" is the same meaning, names are different. "Group" is from "section," made up of.

Typically terminals 2, 3, 4, 6 bits, 12 bits, and so on, which are classified by the number. Press capacity: 10A, 20A, 40A, and so on.

Marked u, v, w are normally three-phase motor terminal block.

Elinker Electric is a professional manufacturer of wiring Terminal, corresponding products can be produced according to the user's needs, welcome to consultation and negotiation!