Cannon Mil-DTL 5015 E/R Connectors

ITT Cannon designed and qualified to Mil-DTL 5015. Environmental resistant with solder termination. Similar to MS A&B series connectors except have resilient insulators and wire sealing grommets. This series includes integral cable clamps for wire strain relief at the rear of the connector. O-rings provide sealing at the interface. Crimp contacts are available.

Cannon KPT-KPSE Connectors

ITT Cannon Miniature Circular series KPT and KPTB (thru-bulkhead) provides a broad range of general purpose solder cup connectors. While cannon series KPSE offers a wide selection of miniature circular high performance crimp connectors. Cannon connectors are compatible with all MIL-C-26482 and VG95328 connectors with corresponding size and contact arrangements, offering increased design possibilities, at a lower cost. A wide range of interchangeable accessories are also available for these products.

Cannon D Subminiature Connector

ITT Cannon Military/High Reliability D Subminiature connectors are used in many applications. Being the inventor of the D Subminiature connector, ITT Cannon is able to use its extensive design expertise and high quality manufacturing processes to insure the optimum performance and reliability.

Cannon D Subminiature connectors with fixed contacts in solder cup, straight and 90° PC contact terminations are qualified to MIL-C-24308. These highreliability D Subminiature connectors are the finest quality connectors could be used with our wide range of accessories.

Cannon MDMH connectors are ideal for applications requiring a better seal than can be achieved with epoxy resins.Cannon connector utilizes size 24 AWG  contacts that are compression glass sealed through a steel shell and into a diallyl pthalate front end insulator. An interfacial seal provides environmental protection when mated. We recommend MDMH receptacles connectors be soldered to the chassis or container for a completely leak-proof joint.